Skip to content
Docs for Nexavia and Thynkr

Supported IoT Devices

The following IoT devices are currently supported (decoders for new devices are always in development).

Adeunis

ARF8230AA Pulse Meter

Pulse meter

Default pairing code (based on firmware version)

adeunis-pulsemeter-v001

Axioma

QALCOSONIC W1

Ultrasonic water meter

Default pairing code (based on firmware version)

axioma-qalcosonic-w1-v001

B Meters

LORA-PULSE

The LoRaWAN module LORA-PULSE is designed to work in combination together any brand size and version of water meters equipped with pulse output

Default pairing code (based on firmware version)

bmeters-lorapulsemeter-v001

Bitgear

Parking Sensor

Parking sensor

Default pairing code (based on firmware version)

bitgear-parking-v001

Birdz

G3 Water Meter

Water metter

Default pairing code (based on firmware version)

birdz-g3-water-meter-v001

Dragino

LT-22222-L

LoRa I/O Controller

Default pairing code (based on firmware version)

dragino-lt22222l-v001

LDS03A

Open/Close LoRaWAN Door Sensor

Default pairing code (based on firmware version)

dragino-lds03a-v001

GlobalSat

LS-111P

Carbon Dioxide (CO2), Temperature and Humidity Sensor

Default pairing code (based on firmware version)

globalsat-lp111-v001

LT-100

Sensor for asset tracking, pet tracking, and personal monitoring of children and elderly

Default pairing code (based on firmware version)

globalsat-lt100-gps-tracker-v001

GreenMesh

Parking Sensor

Parking sensor

Default pairing code (based on firmware version)

greenmesh-parking-sensor-v001

IMBuildings

Insa

ADO Pulse ClipOn

Pulse sensor

Default pairing code (based on firmware version)

insa-ado-pulse-clip-on-v001

ADO Valve

/

Default pairing code (based on firmware version)

insa-ado-valve-v001

inteliLIGHT

FRE-24-ZHAGA-L

LoRaWAN compatible luminaire controller

Default pairing code (based on firmware version)

intelilight-fre24-zhaga-l-v001

Lansitec

Libelium

Smart Parking

Smart Parking with 2 different detection systems - Radar and Magnetic

Default pairing code (based on firmware version)

libelium-parking-v001

Nasys

Pulse Reader UM3080

LoRaWAN® Pulse Reader enables acquisition of data from the pulse emitting devices

Default pairing code (based on firmware version)

nasys-um3080-v001

BK-G Pulse Reader CM3061

LoRaWAN® Pulse reader for Honeywell(Elster) BK-G diaphragm gas meters BK-G1,6 to BK-G100 that are equipped with the index Z3/Z6.

Default pairing code (based on firmware version)

nasys-cm3061-v001

LoRaWAN wM-Bus Pulse Reader UM3081A

LoRaWAN wM-Bus Pulse Reader interface enables acquisition of data from the pulse emitting devices

Default pairing code (based on firmware version)

nasys-um3081a-v001

Luminaire Controller Philips Xitanium

Wireless device for remote control of the LED luminaires

Default pairing code (based on firmware version)

nasys-ul20xx-philips-xitanium-v001

Luminaire Controller Tridonic Feral

Wireless device for remote control of the LED luminaires

Default pairing code (based on firmware version)

nasys-ul20xx-tridonic-feral-v001

Luminaire Controller Philips Street Saver

/

Default pairing code (based on firmware version)

nasys-ul20xx-philips-street-saver-v001

Nke

Watteco Switch Sensor

/

Default pairing code (based on firmware version)

nkewatteco-switch-v001

Watteco Pulse 100 Sensor Counter

/

Default pairing code (based on firmware version)

nkewatteco-pulse100-v001

Watteco Pulse Sensor Counter

/

Default pairing code (based on firmware version)

nkewatteco-pulse-v001

Watteco Smart Plug

The Class C LoRaWAN SMART PLUG

Default pairing code (based on firmware version)

nkewatteco-smartplug-v001

Remoticom

ZSC150

ZSC150 series are the most advanced products in Zhaga Smart Controller family

Default pairing code (based on firmware version)

remoticom-zsc150-v001

Sagemcom

Siconia WATER SM

Watter meter

Default pairing code (based on firmware version)

sagemcom-siconia-water-meter-sm-v001

Sensoneo

Waste Single Sensor 3.0

Sensors measures fill-levels in bins via ultrasonic beams (any type of waste - mixed, paper, glassm plastics,…)

Default pairing code (based on firmware version)

sensoneo-waste-single-v003

Senzemo (formerly Sensedge)

WSL40 Distance Sensor

Distance sensor

Default pairing code (based on firmware version)

sensedge-wsl40-v004

Microclimate Sensor

Indoor Microclimate Sensor

Default pairing code (based on firmware version)

sensedge-senstick-microclimate-V002

Senstick SPU10

/

Default pairing code (based on firmware version)

sensedge-senstick-spu10-v001

Senstick Microclimate SMC30

/

Default pairing code (based on firmware version)

sensedge-senstick-smc30-v003

Senstick Probe STP30

/

Default pairing code (based on firmware version)

sensedge-senstick-probe-stp30-v001

Senspuck SPU10B

/

Default pairing code (based on firmware version)

sensedge-senspuck-spu10b-v001

Senspuck SPU20

/

Default pairing code (based on firmware version)

sensedge-senspuck-spu20-v001

Senspuck SPU20

/

Default pairing code (based on firmware version)

sensedge-senspuck-spu20-v001

Synetica

The enLink Air LoRaWAN Air Quality Monitor is a precision instrument which accurately measures up to 14 key environmental parameters

Default pairing code (based on firmware version)

synetica-enlink-oaq-v001

Talkpool

OY1410 Pulse Meter

LoRaWAN unit designed to function in combination with B Meters’ IWM PL 3 or IWM PL-4 pulse meters

Default pairing code (based on firmware version)

talkpool-oy1410-pulsemeter-v001

Tekelek

TEK 766 LoRa Ultrasonic

Ultrasonic LoRaWAN liquid level sensor

Default pairing code (based on firmware version)

tekelek-tekaqualoraultrasonic-v001

Turbo

TBS-220

Wireless geomagnetic vehicle detector

Default pairing code (based on firmware version)

turbo-tbs220-v001

uRAD

INDUSTRIAL

IOT Air Quality Monitor

Default pairing code (based on firmware version)

urad-industrial-v001

Model A3

Air Quality Monitor

Default pairing code (based on firmware version)

urad-a3-v001

Vega

SI-11 - pulse counter

SI-11 pulse counter is designed for counting of pulses incoming to 4 independent inputs

Default pairing code (based on firmware version)

vega-si11-pulsemeter-v001

Smart-SS0102 - smoke sensor

Smart-SS0102 is designed to detect smoke in the protected area

Default pairing code (based on firmware version)

vega-ss0102-smoke-v001

Smart-UM0101 - universal office sensor 5 in 1

Smart-UM0101 sensor combines a several functions: control of temperature, humidity parameters of the environment, CO2 level, noise and ambient light level with the ability to set thresholds of these ones

Default pairing code (based on firmware version)

vega-um0101-universal-v001

NB11

NB-11 pulse counter is designed for counting the pulses arriving at 6 independent inputs

Default pairing code (based on firmware version)

veganb-11

GM-2

Pulse counter GM-2 is designed to take readings from Elster gas meters

Default pairing code (based on firmware version)

vega-gm2-v001

X-Logic

IoT LoRaWAN Pulse Counter

Pulse Counter for electronic pulse detection for new and existing meters (gas and water)

Default pairing code (based on firmware version)

xlogic-lora-pulse-v001

NB-IoT Pulse Counter

Pulse Counter ADVANCED for electronic pulse detection for new and existing meters (gas, electricity and water)

Default pairing code (based on firmware version)

xlogic-nb-pulse

Zenner

EDC Module for Watter Meters

The EDC module is a clip-on module for secure remote reading to integrate water meters in Smart Metering AMR/AMI Systems by pulser, M-bus or radio

Default pairing code (based on firmware version)

zenner-edc-module-v001